OH2GI-HAM SYSTEM Version 6.4g Updated March. 10, 2000 INSTALL.TXT ---------------------------------------------------------------------------- Please read file: LICENSE.TXT for Copyright, License Agreement, registration procedure and fees. INSTALLATION Under DOS: System requirements: - PC 386 or better with hard disk C: to H:, color display and keyboard with 102 keys. Smartdrive (.5M bytes) and Virtual disk 250 Kb suggested. COM-1 and/or COM-2 port, also COM-1 to COM-4 if Rig control is in use. - DOS version 5 or later or OS/2 WARP, Win3.11, Win95, Win98 Note!! with Win: use DOS Full screen and adjust MS-DOS Idle sensitivity bar to maximum left in MS-DOS Properties. - Diskette drive A: or B: for 2M diskettes (optional) - One or two TNCs: Kantronics KAM, AEA PK-232MBX, AEA PK-900, AEA DSP-2232, AEA DSP-232, MFJ-1278, SCS PTC-II and sound card modem with program. One of the TNCs (KAM or PK-900 or DSP-2232) can use in Dual-port mode (DX-Cluster and HF at the same time) - Mouse and program for mouse (optional) - PKZIP.EXE program needed in \JUKATEST for Contest paperwork program. - E.EXE or E.COM edit program needed, refer to step-6 Note!! If you use the program only for logging then TNC is not needed, but you must select the COM-port and one TNC from list. The following installation procedure is recommended. Windows user do following: Click Start button and select Programs, then select MS-DOS prompt. Select DOS-full screen by Alt-Enter keys. If you are installing from the DISKETTE OR CD-rom then skip steps 1 to 4. Installation from Internet: 1. Use any hard disk drive (not only C:). Create the JUKARTTY directory in DOS prompt: CD \ MD \JUKARTTY 2. Change directory to JUKARTTY: CD \JUKARTTY 3. Copy the JUKARTTY.ZIP from the Web site www.kolumbus.fi/jukka.kallio/ into the \JUKARTTY directory: COPY \xxxxx\JUKARTTY.ZIP (xxxxx = installation disk) 4. Unzip the file JUKARTTY.ZIP using PKUNZIP decompression utility (not provided). Enter the following command: PKUNZIP JUKARTTY.ZIP 5. Execute INSTALL.BAT program in DOS environment and follow the instructions on the screen: INSTALL 6. If Editor E.EXE or E.COM missing then E.BAT file needed with data: C:\DOS\QBASIC/EDITOR %1 or xxxxxx %1 (xxx = editor program) or COPY C:\WINDOWS\COMMAND\EDIT.COM \JUKARTTY\E.COM and COPY C:\WINDOWS\COMMAND\EDIT.COM \JUKATEST\E.COM 7. Read BEEP.TXT and insert FIXBEEP.COM into AUTOEXEC.BAT file (optional) All necessary components are loaded into \JUKATEST for contesting and into \JUKARTTY for normal QSOs. If distribution diskette needed then type: CD \JUKARTTY JKCOPY README.HAM is the user's manual for OH2GI-HAM SYSTEM, it is a DOS text file and can be edited and printed by JUKAHELP.EXE program. Type: JUKAHELP, then F2. or type: JUKAHELP README.HAM. Read: - Copyright: - System Requirements: - Install Instructions: - For use of TNC(s) please refer to pages k to o For WAEDC demo please refer to online HELP Alt-H / F2 or JUKAHELP.EXE / F2. It is a good idea to run the WAEDC demo first. For WAEDC demo type: CD \JUKATEST JUKKA or JUKKADSP Note!!! online HELP Alt-H To install the next contest: CD \JUKATEST JUKAUTIL INstall JUKKA or JUKKADSP For normal QSOs refer to online help (Alt-H) (running RTTY or CW QSO...): CD \JUKARTTY JUKKA or JUKKADSP -----------------------------End of install---------------------------- Please feel free to forward questions, suggestions and problem reports. Jukka Kallio (OH2GI), Voitontie 10, FIN-02820 ESPOO, FINLAND E-MAIL: jukka.kallio@kolumbus.fi Homepage: http://www.kolumbus.fi/jukka.kallio/ Tel: +358-9-8635979 ======================================================================== ----Changes V4.2 ---> V4.4c--------- - Two-TNC support with KAM in HOST mode added. In other words: Simultaneous operation via HF and VHF ports, in addition to another HF TNC, providing two HF screens and VHF DX-Cluster screen. Most versatile configuration is to use KAM in HOST mode and DSP modem or other TNC for three screens: DX-Cluster and two HF-SCR. Thus HF-TNC 1/2 and DX-Cluster screens can be seen on same screen and mouse can be used for call, exchange and DX-spots. - Online HELP system improved (Alt-H) - Errors in README.HAM corrected. - Added a new file JUKAERRO.ERR (automatic error display) - TNC config improved (JUKATNC*.HAM files) - Third screen added for Two-tnc system if KAM in HOST mode selected and second TNC selected - Error in JUKAUTIL INSTALL select N (unknown contest) fixed ----Changes V4.4c ---> V5.b--------- - The system modified for Windows 3.1, succesfully tested with Win 3.1 and OS/2 Warp (with Win, use DOS Full screen not window) - Wrong calculation in VOLTA contest fixed - Text files for CW contests added - Tuning Indicator for DSP modem improved (Sound card modem) - Double check for RTTY Contests done, some minor changes to CW.* files - JUKAUTIL INSTALL added a new menu for RTTY, CW and SSB Contests - JUKASUB CONFIG and JUKASUB BUFFER improved - Error in JUKAUTIL LST fixed (Print LOG program) - EA Contest updated (DXCC Country is multi not Zone) - Install from E-MAIL is INSTALL.BAT (not EMAIL.BAT) ----Changes V5.b ---> V5.c--------- - M.....AUTO-IPL With MENU-3 removed from LOAD-MENU (JUKKA.EXE) - Alt-S is SSB mode for SSB logging in MAIN screen. - AMTOR reconnect is + in Selcall menu (Alt-A) in MAIN screen - ARI Contest updated, (error in JUKAWPX.WPX file) - VOLTA Contest updated (JUKKA.EXE and JUKASUB.EXE) - New command added JUKAUTIL SUMMARY (score and statistical print SUMMARY.LST) Refer to README.HAM Page-7 (Paper-work after the contest) - Tested with Win-95 (with Win, use DOS Full screen not window) ----Changes V5.c ---> V6.0-------------------------------------------------- - AEA-DSP-2232 and AEA-PK-900 supported in dual port mode. - The PK-900 or DSP-2232 can be used in dual radio environment, in addition you can select second TNC in terminal mode or DSP-modem. - Supported TNCs with PK-900 or DSP-2232 in Dual-port mode: Sound card modem, Kantronics KAM, AEA PK-232, AEA DSP-232, MFJ-1278. - JUKKADSP.EXE is new program for AEA PK-900 and AEA DSP-2232. Use JUKKADSP.EXE instead of JUKKA.EXE with AEA PK-900 or AEA DSP-2232. - JUKASUB.EXE updated for PK-900 and DSP-2232 - Distances and Bearings calculation added (JUKASUB BEARING) ----Changes V6.0 ---> V6.1-------------------------------------------------- - DUPE.LST updated (JUKAUTIL LST Dupe select in menu) - TARA RTTY contest added (CW.TRA file) - WAEDC QTC transmit, previous '1200 CALL 123' new '1200/CALL/123' ----Changes V6.1 ---> V6.2-------------------------------------------------- - JUKAUTIL LST Log print program updated - JUKAUTIL INSTALL Bug in TARA Contest fixed - JUKKA.EXE and JUKKADSP.EXE, Alt-F changed to Alt-J (conflict with RITTY) - INSTALL.BAT updated. ----Changes V6.2 ---> V6.2c------20.12.1997--------------------------------- - MAIN screen RST updated - File JUKATNC5.HAM for Old KAM updated (invert/normal command) ----Changes V6.2c---> V6.3 --12.1.1998, 20.1.1998, 30.1.1998, 6.3.1998 - OK RTTY Contest added, file CW.OKR. - The online HELP system updated (Alt-H). New files: JUKAHELP.EXE, JUKAHELP.HLP, README.HAM, SOUND_C.HLP. Old help files removed. - Second call-sign added to MAIN-screen (Alt-N, Alt-Y) - Sound card modem BITTY by K6STI is included. Install BITTY or RITTY into memory by BITTY X or RITTY X command. - JUKATNC4.HAM updated for BITTY and RITTY - The unlicensed evaluation version of BITTY runs for a limited time. New files in V6.3: BITTY.EXE, BITTY.INI, BITTY.DOC, JUKAHELP.EXE, JUKAHELP.HLP, BUFFER.HLP, SOUND_C.HLP, CW.OKR (TESTCW.OKR), JUKATNCC.HAM, JUKATNCD.HAM, JUKATNCE.HAM. Updated files in V6.3: JUKKA.EXE, JUKKADSP.EXE, JUKAUTIL.EXE, JUKASUB.EXE, README.HAM, JUKATNC4.HAM, JUKATNC.HLP ----Changes V6.3---> V6.3a -- 15.3.1998 ----------------------------------- - Bell character ASC(007) printed as apostrophe in RTTY mode - BITTY 1.01 update, Wide/Narrow filter select added (Alt-W) files: BITTY.*, JUKKA.EXE and JUKKADSP.EXE ----Changes V6.3a--> V6.3b -- 25.3.1998 ----------------------------------- - BITTY 1.02 update - Online help in Finnish. New file: README.OH, updated file: JUKAHELP.EXE - New DXCC country H40 Temotu. Files: PREFIX.* and JUKABEAR.DEF - JUKASUB TNC routine updated for BITTY, RITTY and BTL files: JUKATNC.EXE, JUKKA.EXE, JUKKADSP.EXE, JUKATNCC.HAM, JUKATNCD.HAM and JUKATNCE.HAM ----Changes V6.3b--> V6.3c -- 6.7.1998 ----------------------------------- - BITTY 1.03 update, transmit bug fixed for non-Creative Labs sound cards. - BITTY 1.04 update, character detection improved. Spot-frequency FFT correction. - Prefix CT98 added into PREFIX.* files - New contests added: SCC RTTY Championship, CW.SCC (TESTCW.SCC) and BARTG Autumn 1998 RTTY Sprint, CW.AUT (TESTCW.AUT) - Online help in German. New file: README.DL, updated file: JUKAHELP.EXE ----Changes V6.3c--> V6.3d -- 18.9.1998 ---------------------------------- - Install routine updated for C: to H: disk. Updated files: INSTALL.TXT, INSTALL.BAT and JUK*.EXE - Online help updated files: JUKAHELP.HLP, README.* - Online help in French. New file: README.FR, updated file: JUKAHELP.EXE - Name lookup updated, files: JUKKA.EXE and JUKKADSP.EXE - Paper-Work program (JUKAUTIL LST) updated for Log print and for log transfer via E-MAIL, also *.ZIP file incl. Updated files: JUKAUTIL.EXE and JUKASUB.EXE. - Operation time and rest time/period calculation included in Paper-Work (JUKAUTIL LST) and Alt-F11 in MAIN screen. ----Changes V6.3d--> V6.3e -- 28.10.1998 ---------------------------------- - Updated for Win-95 and Win-98. Note!! with Win: use DOS Full screen and adjust MS-DOS Idle sensitivity bar to maximum left in MS-DOS Properties. - Rig control included for TS-850S and FT-1000MP (Alt-B in MAIN screen) also the Rig control setup is included in INSTALL and JUKASUB TNC routines. You can include a new Transceiver into the JUKARIG.TAB file then run: JUKASUB TNC - Install command of Sound card modem is included in the system. All necessary files (RITTY.* or BITTY.*) must be in \JUKATEST and \JUKARTTY ----Changes V6.3e--> V6.3f -- 20.11.1998 ---------------------------------- - BITTY 1.05 update, ATC improved - JUKAUTIL.EXE, error in JUKAUTIL LST fixed - JUKKA.EXE and JUKKADSP.EXE, F1 key removed in QSO screen for WAEDC QTC - Toggle Alt-X (Cluster/MAIN) improved in single TNC system (terminal mode) - Hang with Rig control fixed ----Changes V6.3f--> V6.3g -- 25.1.1999 ---------------------------------- - SCS PTC-II modem in terminal mode added - PACTOR support for Sound-card modem added - Operational enhancements for call sign detection and duplicate identification and F5 (WORKED) in MAIN-screen removed - Rig control for further Kenwood models tested (TS-450S and TS-690S) - F4 change to F5 (SEEK and Edit log file) - New Contest XE RTTY added - Contest SARTG NEW YEAR added ----Changes V6.3g--> V6.3h -- 9.2.1999 ---------------------------------- - PSK31 mode supported Alt-Z in MAIN-screen (only for logging) - Minor bug fixed in MAIN-screen (name lookup) - E4 Palestine added into PREFIX.* files ----Changes V6.3h--> V6.3i -- 23.3.1999 ---------------------------------- - PSK31 mode supported for PTC PSK-II Filmware 2.7, (refer to PSK31.TXT) - Command mode for SCS PTC-II canged from 003 to Esc character (027) - Error 1007 fixed ----Changes V6.3i--> V6.3j -- 6.4.1999 ---------------------------------- - Mode menu Alt-Z ----Changes V6.3j--> V6.3l -- 9.4.1999 ---------------------------------- - New Contest added: TARA / PSK31 Rumble ----Changes V6.3l-> V6.4 -- 1.5.1999 ---------------------------------- - New text-buffer for PSK31 mode of SCS PTC-II modem (Alt-F5 'S') in QSO screen - Install and SETUP updated for CD-rom - Help files updated for PSK31 mode - New help in Swedish ----Changes V6.4--> V6.4a -- 2.7.1999 ---------------------------------- - HELL mode added (only logging, no modem available) - New Contests added: DARC HELL-Contest (CW.HEL) and CCCC PSK31 (CW.SAA) ----Changes V6.4a--> V6.4b -- 30.11.1999 ---------------------------------- - JUKAUTIL.EXE (INstall) updated for PSK Rumble Contest - JUKKA.EXE Rig-control menu (Alt-B) in Two-TNC system - Conversion program for ADIF file added (JUKAHELP ADIF) - Millenium PSK31 Contest added - Ukrainian RTTY Contest added - Automatic CQ added ----Changes V6.4b--> V6.4c -- 14.1.2000 ----------------------------------- - QSL print program (JUKASUB QSL) updated ----Changes V6.4c--> V6.4d -- 26.1.2000 ----------------------------------- - Minor update for CW.* files - ADIF Import/Export updated for Logger by K4CY and QSL printing program by DF3CB ----Changes V6.4d--> V6.4e -- 7.2.2000 ----------------------------------- - ADIF-File Export updated (space character added in front of Comment field) - JUKARIG.TAB updated for ICOM rig ----Changes V6.4e--> V6.4f -- 17.2.2000 ----------------------------------- - Prefix file(s) updated, also more room in PREFIX.* files. - Updated files: README.HAM, JUK*.EXE, PREFIX.ARR and PREFIX.WAE - Run time ERROR #14 in JUKKA.EXE and JUKKADSP.EXE UPDATED before feb,18 2000 ----Changes V6.4f--> V6.4g -- 10.3.2000 ----------------------------------- - Initialize routin for TNC-2 updated (only in Two-TNC system) 73 de Jukka.. (OH2GI) Jukka Kallio (OH2GI), Voitontie 10, FIN-02820 ESPOO, FINLAND E-MAIL: jukka.kallio@kolumbus.fi Homepage: http://www.kolumbus.fi/jukka.kallio/ Tel: +358-9-8635979 ===========================================================================