The FT-8000R Expanded TX Mod Behind the front panel (LCD Display) of the radio were the Lithium battery is soldered. You will see a PC board similar to the one below. There is a row of 15 jumpers. There is a larger component on the 4th and 6th position from the left. If you remove the component at the 6th from the left position and reset the radio you will have expanded TX. This does not open the cellular block on the radio. It may be controlled by one of the other jumper locations on this row of 15. _______________________________________________________ | ::::::::::::::: | | ^ | | | Lithium | | Remove Battery | | R3028 ___ | | [ ] | ________________________________________________[___]_| Mike Connector For educational use only! Do not transmit outside the Amateur Bands! I am not responsible if you damage your radio. Please send any updates/changes to: johanson@sprintmail.com